D3-18.1AXH
Title
2 cylinder compressor with integrated direct on line (DOL) motor and ptc probes connected to the protection system
Designed and manufactured in compliance with the safety requirements of the 2014/34/EU ATEX directive. Suitable for use in environments with possible random presence of flammable gases in the atmosphere,
Available in three different versions
AXH for operation with hydrocarbons [R290, R1270, R600, etc.].
PAG lubricating oil charge
AXY for operation with HFC, HCFC, HFO refrigerants.
POE lubricating oil charge
AXE ECOinside build optimized for operation with R134a and HFO [R1234ze,R1234yf, etc.] refrigerants
POE type oil charge
Standard
•∆ = 50Hz/220-240V/3Ph (60Hz/265-290V/3Ph)
•Y = 50Hz/380-420V/3Ph (60Hz/440-480V/3Ph)
- Electronic control module for motor monitoring and protection
- suction and discharge valves
- Electrical connections box
- POE32 oil load
- oil sight glass for visual checks or connection to automatic, mechanical and electric devices/regulators
- Rubber dampers kit
- Nitrogen charge (2bar min)
- Packaging for transport, handling and storage
Opzione
- Electric motors for other voltage supply
- Electric oil heater
- Head cooling fan
- head with RSH system for capacity control
- oil level electronic regulator
- Flange and shut-off valve for oil equalization
SI IP
Cylinders 2 # 2 #
Displacement @ 50 Hz 17.9 m3/h [50Hz] 632.23 CFH [50Hz]
Displacement @ 60 Hz 21.52 m3/h [60Hz] 760.09 CFH [60Hz]
Motor version [1] 2 2
Nominal Motor power 2.2 kW 2.2 kW
Motor voltage at 50 Hz [2] 220-240V - 380-420V/3/50Hz DOL V/ph/Hz 220-240V - 380-420V/3/50Hz DOL V/ph/Hz
Motor voltage at 60 Hz [2] 265-290V - 440-480V/3/60Hz DOL V/ph/Hz 265-290V - 440-480V/3/60Hz DOL V/ph/Hz
Bridges for DOL start Standard Standard
MRA, max operating current at 230V/50Hz and 280V/60Hz 16.8 A 16.8 A
MRA, max operating current at 400V/50Hz and 460V/60Hz 9.7 A 9.7 A
LRA, max starting current at 230V/50Hz and 280V/60Hz, DOL motor 75.9 A 75.9 A
LRA, max starting current at 400V/50Hz and 460V/60Hz, DOL motor or PWS motor-DOL connection 43.7 A 43.7 A
Max power consumption 5.2 kW 5.2 kW
Frequency min 30 Hz 30 Hz
Frequency max [3] 87 Hz 87 Hz
Control and protection device INT69® INT69®
Electric terminal box class protection IP56 IP56
Maximum pressure HP 30 bar 435.0 psi
Maximum pressure LP 20.5 bar 297.3 psi
Oil type [4] PAG68 PAG68
Oil charge (3/4 of sight glass) 1.1 l 37.20 fl oz
Lubrication type Centrifugal Centrifugal
Net weight 49 kg 108.03 lb
Max Length 374 mm 14.74 inch
Max Width 242 mm 9.53 inch
Max Height 317 mm 12.49 inch
Rubber mounts diameter [2] 30 mm 1.18 inch
Rubber mounts height 30 mm 1.18 inch
Rubber mounts shore 45 sh 45 sh
Compressor body material Cast Iron Cast Iron
Note
[1] Motor version: 1 = high and mid temp. all refrigerants; 2 = low and mid temp. all refrigerants; 3 = ECOinside, low temp. R134a, R1234ze, R1234yf only
[2] Other motor voltage available on request
[3] Maximum frequency depends on the working condition: see FSS3 (Frascold selection software)
[4] Different kind of oil available on request
List of available accessories
Accessory Accessory code
Kit adapters for oil equalization line - 1" ROT 5/8" ODS T00SK170200
Kit adapters for oil equalization line - 1"1/4 ROT 1"1/8 ODS T00SK170300
Oil heater (230V-50W) T00CH13V1AX-RIC
Abbreviation Technical data SI IP
SV Suction valve (SV) - -
DV Discharge valve (DV) - -
A Length (A) 374 mm 14.74 inch
B Width (B) 242 mm 9.53 inch
C Height (C) 317 mm 12.49 inch
D Base mounting (D) 234 mm 9.22 inch
E Base mounting (E) 194 mm 7.64 inch
F Suction valve (F) 165 mm 6.50 inch
G Suction valve (G) 221 mm 8.71 inch
H Suction valve (H) 53 mm 2.09 inch
L Discharge valve (L) 94 mm 3.70 inch
M Discharge valve (M) 192 mm 7.56 inch
N Discharge valve (N) 13 mm 0.51 inch
1 High pressure plug (1) 1/8" NPT 1/8" NPT
2 Low pressure plug (2) 1/8" NPT 1/8" NPT
3 Oil charge plug (3) 1/4" GAS 1/4" GAS
4 Oil level sight glass (4) - -
5 Crankcase heater (5) - -
6 Oil drain plug (6) M8 x 22 M8 x 22
12 Oil return plug (12) 1/8" NPT 1/8" NPT
NP Name Plate (NP) - -
Data sheets
Installation and start up instructions
Technical and product information bulletins
Conformity declarations and certifications
Previous documentation (consultation only)
Use and maintenance instructions
Catalogues
Product brochure
Technical and usage information
We'd love to hear from you

For application support or questions about our products, send us a message.Our experienced staff is one of our gratest assets, and they are ready to help. To find out why Blue Is Better, contact us today.