Title
Semi-hermetic compressor with built-in electric motor, part winding starting (PWS) and thermal protection probes connected to the electronic control module
Standard
•PWS (Y/YY) = 50Hz/380-420V/3Ph (60Hz/440-480V/3Ph)
•DOL (YY) = 50Hz/380-420V/3Ph (60Hz/440-480V/3Ph)
- electronic control module for monitoring, protection, diagnostics and communication
- suction and discharge valves
- electrical connections box
- DOL connection bars
- discharge temperature control sensor
- reversible oil pump
- electronic pressure switch for lubrication monitoring
- POE oil charge
- 2 oil sight glasses for visual checks or connection to automatic mechanical and electric devices/regulators
- rubber supports
- Nitrogen charge (2bar min)
- appropriate packaging for transport, handling and storage
Opzione
- electric motors for various voltage supply values
- special painting for off-shore installation
SI IP
Cylinders 4 4
Displacement @ 50 Hz 58.5 m3/h [50Hz] 2,066.22 CFH [50Hz]
Displacement @ 60 Hz 70.2 m3/h [60Hz] 2,479.46 CFH [60Hz]
Motor version [1] 3 3
Motor power (HP) 15 15
Motor power (kW) 11 11
Motor voltage at 50 Hz [2] 380-420V/3/50Hz PWS V/ph/Hz 380-420V/3/50Hz PWS V/ph/Hz
Motor voltage at 60 Hz [2] 440-480V/3/60Hz PWS V/ph/Hz 440-480V/3/60Hz PWS V/ph/Hz
PWS partition 50-50 50-50
Capacity control: CC + RSH 100%-75%-50%-25% 100%-75%-50%-25%
MRA, maximum operating current at 400V/50Hz and 460V/60Hz 17.5 A 17.5 A
LRA, maximum starting current at 400V/50Hz and 460V/60Hz, PWS motor 59.5 A 59.5 A
LRA, maximum starting current at 400V/50Hz and 460V/60Hz, DOL motor, PWS motor with DOL connection 102.6 A 102.6 A
Frequency min 30 Hz 30 Hz
Frequency max [3] 70 Hz 70 Hz
Protection device INT69® TML Diagnose INT69® TML Diagnose
Electric box class protection IP65 IP65
Maximum pressure HP 30 bar 435.0 psi
Maximum pressure LP 20.5 bar 297.3 psi
Oil type [4] POE68 POE68
Oil charge (3/4 of sight glass) 4 l 135.26 fl oz
Lubrication type Oil pump Oil pump
Net weight 170 kg 374.78 lb
Max Length 672 mm 26.48 inch
Max Width 460 mm 18.12 inch
Max Height 463 mm 18.24 inch
Rubber mounts diameter [2] 50 mm 1.97 inch
Rubber mounts height 30 mm 1.18 inch
Rubber mounts shore 55 sh 55 sh
Compressor body material Cast Iron Cast Iron
Note
[1] Motor version: 1 = high and middle temperature, all refrigerants; 2 = low and middle temperature, all refrigerants; 3 = ECOinside, low temperature, only R134a and R1234ze
[2] Others available on request
[3] Maximum frequency depends on the working condition: see FSS3 (Frascold selection software)
[4] Different kind of oil available on request
List of available accessories
Accessory Accessory code
Oil heater (230V-150W) T00CH9-RIC
Capacity control head (CC) 230V AC T00SK220200
Head for unloaded start (US) 230V AC T00SK250200
Optoelectronic oil level switch T00WK252
Electronic oil regulator T00EC1900
Motor fan for supplementary cooling - 230-400V/3/50-60HZ SZ-FM2V
Kit adapters for oil equalization line - 1" ROT 5/8" ODS T00SK170200
Kit adapters for oil equalization line - 1"1/4 ROT 1"1/8 ODS T00SK170300
Discharge temperature sensor T00EC50D
Capacity control head (RSH) 230V AC T00SK220400
DP-Modbus Gateway T00EC59
Liquid injection kit (FLI) SZ-FLI/2
Water cooled head kit T00SK50000
Connection cable Modbus Gateway - INT69 T00EC65
Abbreviation Technical data SI IP
SV Suction valve (SV) 1⅝ inch 1⅝ inch
DV Discharge valve (DV) 1 ⅛ inch 1 ⅛ inch
A Length (A) 672 mm 26.48 inch
B Width (B) 460 mm 18.12 inch
C Height (C) 463 mm 18.24 inch
D Base mounting (D) 381 mm 15.01 inch
E Base mounting (E) 305 mm 12.02 inch
F Suction valve (F) 120 mm 4.73 inch
G Suction valve (G) 367 mm 14.46 inch
H Suction valve (H) 95 mm 3.74 inch
L Discharge valve (L) 152 mm 5.99 inch
M Discharge valve (M) 352 mm 13.87 inch
N Discharge valve (N) 43 mm 1.69 inch
1 High pressure plug (1) 1/8" NPT 1/8" NPT
2 Low pressure plug (2) 1/4" NPT 1/4" NPT
3 Oil charge plug (3) 3/8" GAS 3/8" GAS
4 Oil level sight glass - -
5 Crankcase heater - -
6 Oil drain plug (6) 3/8" GAS 3/8" GAS
7 Liquid injection valve plug (7) 1/8" NPT 1/8" NPT
8 Liquid injection sensor plug (8) 1/8" NPT 1/8" NPT
9 Oil pressure switch connection (LP) 1/4" NPT 1/4" NPT
10 Oil pressure switch connection (HP) 1/4" SAE 1/4" SAE
11 Oil filter (11) 3/8" GAS 3/8" GAS
12 Oil return plug (12) 1/8" NPT 1/8" NPT
14 Max. discharge temperature sensor (14) - -
15 Electronic oil pressure switch connection - -
NP Name plate (NP) - -
Data sheets
Installation and start up instructions
Previous documentation (consultation only)
Technical and product information bulletins
Catalogues
Conformity declarations and certifications
Product brochure
Use and maintenance instructions
Newsletter
Technical and usage information
Information request
Provide result
24
38