http://www.frascold.it
V15-71AXH
Title
4 cylinder compressor with integrated part winding start (PWS) electric motor and ptc probes connected to the protection system
Designed and manufactured in compliance with the safety requirements of the 2014/34/EU ATEX directive. Suitable for use in environments with possible random presence of flammable gases in the atmosphere,
Available in three different versions
AXH for operation with hydrocarbons [R290, R1270, R600, etc.].
PAG lubricating oil charge
AXY for operation with HFC, HCFC, HFO refrigerants.
POE lubricating oil charge
AXE ECOinside build optimized for operation with R134a and HFO [R1234ze,R1234yf, etc.] refrigerants
POE type oil charge
Standard
•PWS (Y/YY) = 50Hz/380-420V/3Ph (60Hz/440-480V/3Ph)
•DOL (YY) = 50Hz/380-420V/3Ph (60Hz/440-480V/3Ph)
- electronic control module for monitoring, protection, diagnostics and communication
- suction and discharge valves
- Electrical connections box
- PAG68 oil load
- Oil sight glass
- Rubber dampers kit
- Nitrogen charge (2bar min)
- Packaging for transport, handling and storage
Opzione
- Electric motors for other voltage supply
- Electric oil heater
- Discharge temperature sensor
- Head cooling fan
- US unloader start head
- head with RSH system for capacity control
- oil level electronic regulator
- Flange and shut-off valve for oil equalization
SI IP
Cylinders 4 # 4 #
Displacement @ 50 Hz 70.8 m3/h [50Hz] 2 CFH [50Hz]
Displacement @ 60 Hz 84.92 m3/h [60Hz] 2 CFH [60Hz]
Motor version [1] 2 2
Nominal Motor power 11 kW 11 kW
Motor voltage at 50 Hz [2] 380-420V/3/50Hz PWS V/ph/Hz 380-420V/3/50Hz PWS V/ph/Hz
Motor voltage at 60 Hz [2] 440-480V/3/60Hz PWS V/ph/Hz 440-480V/3/60Hz PWS V/ph/Hz
PWS partition 50-50 50-50
Bridges for DOL start Standard Standard
Capacity control: CC + RSH 100%-75%-50%-25% % 100%-75%-50%-25% %
MRA, max operating current at 400V/50Hz and 460V/60Hz 31.5 A 31.5 A
LRA, max starting current at 400V/50Hz and 460V/60Hz, PWS motor 74.8 A 74.8 A
LRA, max starting current at 400V/50Hz and 460V/60Hz, PWS motor-DOL connection 117.1 A 117.1 A
Max power consumption 17.2 kW 17.2 kW
Frequency min 30 Hz 30 Hz
Frequency max [3] 70 Hz 70 Hz
Control and protection device INT69® TML Diagnose INT69® TML Diagnose
Electric terminal box class protection IP65 IP65
Maximum pressure HP 30 bar 435.0 psi
Maximum pressure LP 20.5 bar 297.3 psi
Oil type [4] PAG68 PAG68
Oil charge (3/4 of sight glass) 4 l 135.26 fl oz
Lubrication type Oil pump Oil pump
Net weight 174 kg 383.60 lb
Max Length 672 mm 26.48 inch
Max Width 460 mm 18.12 inch
Max Height 463 mm 18.24 inch
Rubber mounts diameter 50 mm 1.97 inch
Rubber mounts height 30 mm 1.18 inch
Rubber mounts shore 55 sh 55 sh
Compressor body material Cast Iron Cast Iron
Note
[1] Motor version: 1 = high and mid temp. all refrigerants; 2 = low and mid temp. all refrigerants; 3 = ECOinside, low temp. R134a, R1234ze, R1234yf only
[2] Other motor voltage available on request
[3] Maximum frequency depends on the working condition: see FSS3 (Frascold selection software)
[4] Different kind of oil available on request
List of available accessories
Accessory Accessory code
Kit adapters for oil equalization line - 1" ROT 5/8" ODS T00SK170200
Kit adapters for oil equalization line - 1"1/4 ROT 1"1/8 ODS T00SK170300
Oil heater (230V-150W) T00CH41RIC
CC capacity control head 230V AC T00SK220230
US unloader start head 230V AC T00SK250230
Discharge temperature sensor T00EC50D
Abbreviation Technical data SI IP
SV Suction valve (SV) - -
DV Discharge valve (DV) - -
A Length (A) 672 mm 26.48 inch
B Width (B) 460 mm 18.12 inch
C Height (C) 463 mm 18.24 inch
D Base mounting (D) 381 mm 15.01 inch
E Base mounting (E) 305 mm 12.02 inch
F Suction valve (F) 120 mm 4.73 inch
G Suction valve (G) 367 mm 14.46 inch
H Suction valve (H) 95 mm 3.74 inch
L Discharge valve (L) 152 mm 5.99 inch
M Discharge valve (M) 352 mm 13.87 inch
N Discharge valve (N) 43 mm 1.69 inch
1 High pressure plug (1) 1/8" NPT 1/8" NPT
2 Low pressure plug (2) 1/4" NPT 1/4" NPT
3 Oil charge plug (3) 3/8" GAS 3/8" GAS
4 Oil level sight glass (4) - -
5 Crankcase heater (5) - -
6 Oil drain plug (6) 1/4" GAS 1/4" GAS
7 Liquid injection valve plug (7) 1/4" NPT 1/4" NPT
8 Liquid injection sensor plug (8) 1/8" NPT 1/8" NPT
9 Oil pressure switch connection (LP) 1/4" NPT 1/4" NPT
10 Oil pressure switch connection (HP) 1/4" SAE 1/4" SAE
11 Oil filter (11) 3/8" GAS 3/8" GAS
12 Oil return plug (12) 1/4" NPT 1/4" NPT
14 Max. discharge temperature sensor (14) - -
15 Electronic oil pressure switch connection - -
NP Name Plate (NP) - -
Data sheets
Installation and start up instructions
Technical and product information bulletins
Conformity declarations and certifications
Use and maintenance instructions
Previous documentation (consultation only)
Catalogues
Product brochure
Technical and usage information
We'd love to hear from you

For application support or questions about our products, send us a message.Our experienced staff is one of our gratest assets, and they are ready to help. To find out why Blue Is Better, contact us today.