A07-5Y
Title
Semi-hermetic compressor with built-in electric motor, direct on line starting (DOL) and thermal protection probes (PTC or AMS) connected to the electronic control module
Standard
•∆ = 50Hz/220-240V/3Ph (60Hz/265-290V/3Ph)
•Y = 50Hz/380-420V/3Ph (60Hz/440-480V/3Ph)
- Electronic module INT69
- Suction shut-off valve
- Discharge shut-off valve
- Electric terminal box
- DOL connection bars
- POE oil charge
- Oil level sight glass
- Rubber dampers kit
- Nitrogen charge (2bar min)
- Packaging for transport, handling and storage
Opzione
- Electric motors for various voltage supply values
- Special paint for off-shore installation
Semi-hermetic compressor with built-in electric motor, direct on line starting (DOL) and thermal protection probes (PTC or AMS) connected to the electronic control module
Standard
•∆ = 50Hz/220-240V/3Ph (60Hz/265-290V/3Ph)
•Y = 50Hz/380-420V/3Ph (60Hz/440-480V/3Ph)
- Electronic module INT69
- Suction shut-off valve
- Discharge shut-off valve
- Electric terminal box
- DOL connection bars
- POE oil charge
- Oil level sight glass
- Rubber dampers kit
- Nitrogen charge (2bar min)
- Packaging for transport, handling and storage
Opzione
- Electric motors for various voltage supply values
- Special paint for off-shore installation
| SI | IP | |
| Cylinders | 2 # | 2 # |
| Displacement @ 50 Hz | 4.9 m3/h [50Hz] | 173 CFH [50Hz] |
| Displacement @ 60 Hz | 5.9 m3/h [60Hz] | 208 CFH [60Hz] |
| Motor version [1] | 1 | 1 |
| Nominal Motor power | 0.5 kW | 0.5 kW |
| Motor voltage at 50 Hz [2] | 220-240V - 380-420V/3/50Hz DOL V/ph/Hz | 220-240V - 380-420V/3/50Hz DOL V/ph/Hz |
| Motor voltage at 60 Hz [2] | 265-290V - 440-480V/3/60Hz DOL V/ph/Hz | 265-290V - 440-480V/3/60Hz DOL V/ph/Hz |
| MRA, max operating current at 230V/50Hz and 280V/60Hz | 4.7 A | 4.7 A |
| MRA, max operating current at 400V/50Hz and 460V/60Hz | 2.7 A | 2.7 A |
| LRA, max starting current at 230V/50Hz and 280V/60Hz, DOL motor | 18.6 A | 18.6 A |
| Frequency min | 30 Hz | 30 Hz |
| Frequency max [3] | 87 Hz | 87 Hz |
| Control and protection device | INT69® | INT69® |
| Electric terminal box class protection | IP56 | IP56 |
| Maximum pressure HP | 30 bar | 435.0 psi |
| Maximum pressure LP | 20.5 bar | 297.3 psi |
| Oil type [4] | POE32 | POE32 |
| Oil charge (3/4 of sight glass) | 1 l | 33.81 fl oz |
| Lubrication type | Centrifugal | Centrifugal |
| Net weight | 36 kg | 79.37 lb |
| Max Length | 317 mm | 12.49 inch |
| Max Width | 237 mm | 9.34 inch |
| Max Height | 275 mm | 10.84 inch |
| Rubber mounts diameter | 30 mm | 1.18 inch |
| Rubber mounts height | 30 mm | 1.18 inch |
| Rubber mounts shore | 45 sh | 45 sh |
| Sound power level (-10/45, R404A) [5] | 63.5 dB(A) | 66.0 dB(A) |
| Sound pressure level @ 1m (-10/45, R404A) [5] | 55.5 dB(A) | 58.0 dB(A) |
| Compressor body material | Ghisa GJL250 | Ghisa GJL250 |
| Motor protection | PTC | PTC |
| Oil level sight glass | 1 # | 1 # |
| LRA, max starting current at 400V/50Hz and 460V/60Hz, DOL motor | 10.7 A | 10.7 A |
| Note | |
| [1] | Motor version: 1 = high and mid temp. all refrigerants; 2 = low and mid temp. all refrigerants; 3 = ECOinside, low temp. R134a, R1234ze, R1234yf only |
| [2] | Other motor voltage available on request |
| [3] | Maximum frequency depends on the working conditions: use the FSS.3 (Frascold selection software) |
| [4] | For alternative lubricants refer to bulletin FTEC022 |
| [5] | Sound pressure in free field, hemispherical model at 1 meter distance, 50Hz; PWL and SPL in different conditions are available on FSS3 |
| Accessory | Accessory code |
| Water cooled head | T00SK50030 |
| Electronic control module - INT 69 Diagnose (230/110V) | T00EC01D-RIC |
| Oil heater (230V-50W) | T00CH13-RIC |
| Head cooling fan - 230V/1/50-60Hz | SZ-FM1 |
| Electronic oil level regulator - INT280 Diagnose 230V AC | T00EC1900 |
| Kit adapters for oil equalization line - 1" ROT 5/8" ODS | T00SK170200 |
| Kit adapters for oil equalization line - 1"1/4 ROT 1"1/8 ODS | T00SK170300 |
| DP Modbus Gateway | T00EC59 |
| Connection cable Modbus Gateway - INT69 | T00EC64 |
3D Cad - a_1| Abbreviation | Technical data | SI | IP |
| SV | Suction valve (SV) | ⅝ inch | ⅝ inch |
| DV | Discharge valve (DV) | ½ inch | ½ inch |
| A | Length (A) | 317 mm | 12.49 inch |
| B | Width (B) | 237 mm | 9.34 inch |
| C | Height (C) | 275 mm | 10.84 inch |
| D | Base mounting (D) | 234 mm | 9.22 inch |
| E | Base mounting (E) | 194 mm | 7.64 inch |
| F | Suction valve (F) | 150 mm | 5.91 inch |
| G | Suction valve (G) | 209 mm | 8.23 inch |
| N | Discharge valve (N) | 18 mm | 0.71 inch |
| 1 | High pressure plug (1) | 1/8" NPT | 1/8" NPT |
| 2 | Low pressure plug (2) | 1/8" NPT | 1/8" NPT |
| 3 | Oil charge plug (3) | 1/4" GAS | 1/4" GAS |
| 4 | Oil level sight glass (4) | - | - |
| 5 | Crankcase heater (5) | - | - |
| 6 | Oil drain plug (6) | M8 x 22 | M8 x 22 |
| 12 | Oil return plug (12) | 1/8" NPT | 1/8" NPT |
| NP | Name Plate (NP) | - | - |
| H | Suction valve (H) | 29 mm | 1.14 inch |
| L | Discharge valve (L) | 97 mm | 3.82 inch |
| M | Discharge valve (M) | 167 mm | 6.58 inch |