https://www.frascold.it
A07-6AXY
Title
2 cylinder compressor with integrated direct on line (DOL) motor and ptc probes connected to the protection system
Designed and manufactured in compliance with the safety requirements of the 2014/34/EU ATEX directive. Suitable for use in environments with possible random presence of flammable gases in the atmosphere,
Available in two different versions
AXY for operation with HFC, HCFC, HFO refrigerants.
POE lubricating oil charge
AXE ECOinside build optimized for operation with R134a and HFO [R1234ze,R1234yf, etc.] refrigerants
POE type oil charge

Standard
•∆ = 50Hz/220-240V/3Ph (60Hz/265-290V/3Ph)
•Y = 50Hz/380-420V/3Ph (60Hz/440-480V/3Ph)
- Electronic control module for motor monitoring and protection
- Electrical connections box
- POE32 oil load
- oil sight glass for visual checks or connection to automatic, mechanical and electric devices/regulators
- Rubber dampers kit
- Nitrogen charge (2bar min)
- Packaging for transport, handling and storage
Opzione
- Electric motors for other voltage supply
- Electric oil heater
- Head cooling fan
- oil level electronic regulator
- Flange and shut-off valve for oil equalization
SI IP
Cylinders 2 # 2 #
Displacement @ 50 Hz 5.5 m3/h [50Hz] 194 CFH [50Hz]
Displacement @ 60 Hz 6.6 m3/h [60Hz] 233 CFH [60Hz]
Motor version [1] 2 2
Nominal Motor power 0.5 kW 0.5 kW
Motor voltage at 50 Hz [2] 220-240V - 380-420V/3/50Hz DOL V/ph/Hz 220-240V - 380-420V/3/50Hz DOL V/ph/Hz
Motor voltage at 60 Hz [2] 265-290V - 440-480V/3/60Hz DOL V/ph/Hz 265-290V - 440-480V/3/60Hz DOL V/ph/Hz
Bridges for DOL start Standard Standard
MRA, max operating current at 230V/50Hz and 280V/60Hz 4.9 A 4.9 A
MRA, max operating current at 400V/50Hz and 460V/60Hz 2.8 A 2.8 A
LRA, max starting current at 230V/50Hz and 280V/60Hz, DOL motor 18.6 A 18.6 A
Max power consumption 1.6 kW 1.6 kW
Frequency min 30 Hz 30 Hz
Frequency max [3] 87 Hz 87 Hz
Control and protection device INT69® INT69®
Electric terminal box class protection IP54 IP54
Maximum pressure HP 30 bar 435.0 psi
Maximum pressure LP 20.5 bar 297.3 psi
Oil type [4] POE32 POE32
Oil charge (3/4 of sight glass) 1 l 33.81 fl oz
Lubrication type Centrifugal Centrifugal
Net weight 36 kg 79.37 lb
Max Length 317 mm 12.49 inch
Max Width 237 mm 9.34 inch
Max Height 275 mm 10.84 inch
Rubber mounts diameter 30 mm 1.18 inch
Rubber mounts height 30 mm 1.18 inch
Rubber mounts shore 45 sh 45 sh
Compressor body material Cast Iron Cast Iron
LRA, max starting current at 400V/50Hz and 460V/60Hz, DOL motor 10.7 A 10.7 A
Note
[1] Motor version: 1 = high and mid temp. all refrigerants; 2 = low and mid temp. all refrigerants; 3 = ECOinside, low temp. R134a, R1234ze, R1234yf only
[2] Other motor voltage available on request
[3] Maximum frequency depends on the working conditions: use the FSS.3 (Frascold selection software)
[4] For alternative lubricants refer to bulletin FTEC022
List of available accessories
Accessory Accessory code
Kit adapters for oil equalization line - 1" ROT 5/8" ODS T00SK170200
Kit adapters for oil equalization line - 1"1/4 ROT 1"1/8 ODS T00SK170300
Abbreviation Technical data SI IP
SV Suction valve (SV) - -
DV Discharge valve (DV) - -
A Length (A) 317 mm 12.49 inch
B Width (B) 237 mm 9.34 inch
C Height (C) 275 mm 10.84 inch
D Base mounting (D) 234 mm 9.22 inch
E Base mounting (E) 194 mm 7.64 inch
F Suction valve (F) 150 mm 5.91 inch
G Suction valve (G) 209 mm 8.23 inch
L Discharge valve (L) 97 mm 3.82 inch
M Discharge valve (M) 167 mm 6.58 inch
N Discharge valve (N) 18 mm 0.71 inch
1 High pressure plug (1) 1/8" NPT 1/8" NPT
2 Low pressure plug (2) 1/8" NPT 1/8" NPT
3 Oil charge plug (3) 1/4" GAS 1/4" GAS
4 Oil level sight glass (4) - -
5 Crankcase heater (5) - -
6 Oil drain plug (6) M8 x 22 M8 x 22
12 Oil return plug (12) 1/8" NPT 1/8" NPT
NP Name Plate (NP) - -
Data sheets
Installation and start up instructions
Conformity declarations and certifications
Catalogues
Technical and product information bulletins
Product brochure
Previous documentation (consultation only)
Newsletter
Technical and usage information
We'd love to hear from you

For application support or questions about our products, send us a message.Our experienced staff is one of our gratest assets, and they are ready to help. To find out why Blue Is Better, contact us today.