https://www.frascold.it
B2-10.1Yvs
Title
2 cylinder compressor with integrated electric motor and ptc probes connected to the protection system.
Standard
- inverter kit (configured inverter, mounting bracket, cables, cooling fan, I/O module)
- suction and discharge valves
- POE oil charge
- oil sight glass for visual checks or connection to automatic, mechanical and electric devices/regulators
- Rubber dampers kit
- Nitrogen charge (2bar min)
- Packaging for transport, handling and storage
Opzione
- Electric oil heater
- oil level electronic regulator
- Flange and shut-off valve for oil equalization
- programming keypad + cable
- USB serial interface
SI IP
Cylinders 2 # 2 #
Displacement @ 50 Hz 9.9 m3/h [50Hz] 350 CFH [50Hz]
Displacement @ 60 Hz 11.9 m3/h [60Hz] 420 CFH [60Hz]
Motor version [1] 1 1
Nominal Motor power 1.5 kW 1.5 kW
Motor voltage at 50 Hz [2] 400V/3/50Hz V/ph/Hz 400V/3/50Hz V/ph/Hz
Motor voltage at 60 Hz [2] 400V/3/50Hz V/ph/Hz 400V/3/50Hz V/ph/Hz
Bridges for DOL start Standard Standard
MRA, max operating current at 400V/50Hz and 460V/60Hz 6.7 A 6.7 A
LRA, max starting current at 400V/50Hz and 460V/60Hz, PWS motor-DOL connection 35.9 A 35.9 A
Max power consumption 3.6 kW 3.6 kW
Frequency min 30 Hz 30 Hz
Frequency max [3] 87 Hz 87 Hz
Control and protection device NO NO
Electric terminal box class protection IP56 IP56
Maximum pressure HP 30 bar 435.0 psi
Maximum pressure LP 20.5 bar 297.3 psi
Oil type [4] POE32 POE32
Oil charge (3/4 of sight glass) 1 l 33.81 fl oz
Lubrication type Centrifugal Centrifugal
Net weight 44.1 kg 97.22 lb
Max Length 334 mm 13.16 inch
Max Width 237 mm 9.34 inch
Max Height 438 mm 17.26 inch
Rubber mounts diameter 30 mm 1.18 inch
Rubber mounts height 30 mm 1.18 inch
Rubber mounts shore 45 sh 45 sh
Compressor body material Cast Iron Cast Iron
Note
[1] Motor version: 1 = high and mid temp. all refrigerants; 2 = low and mid temp. all refrigerants; 3 = ECOinside, low temp. R134a, R1234ze, R1234yf only
[2] Other motor voltage available on request
[3] Maximum frequency depends on the working conditions: use the FSS.3 (Frascold selection software)
[4] For alternative lubricants refer to bulletin FTEC022
List of available accessories
Accessory Accessory code
Oil heater (230V-50W) T00CH13-RIC
Electronic oil level switch (230V) T00WK252
Electronic oil level regulator - INT280 Diagnose 230V AC T00EC1900
Kit adapters for oil equalization line - 1" ROT 5/8" ODS T00SK170200
Kit adapters for oil equalization line - 1"1/4 ROT 1"1/8 ODS T00SK170300
Programming keyboard for inverter T00EC1822
Interface to connect inverter to PC T00EC1827
Abbreviation Technical data SI IP
SV Suction valve (SV) - -
DV Discharge valve (DV) - -
A Length (A) 334 mm 13.16 inch
B Width (B) 237 mm 9.34 inch
C Height (C) 438 mm 17.26 inch
D Base mounting (D) 234 mm 9.22 inch
E Base mounting (E) 194 mm 7.64 inch
F Suction valve (F) 150 mm 5.91 inch
G Suction valve (G) 209 mm 8.23 inch
H Suction valve (H) 29 mm 1.14 inch
L Discharge valve (L) 97 mm 3.82 inch
M Discharge valve (M) 167 mm 6.58 inch
N Discharge valve (N) 18 mm 0.71 inch
1 High pressure plug (1) 1/8" NPT 1/8" NPT
2 Low pressure plug (2) 1/8" NPT 1/8" NPT
3 Oil charge plug (3) 1/4" GAS 1/4" GAS
4 Oil level sight glass (4) - -
5 Crankcase heater (5) - -
6 Oil drain plug (6) M8 x 22 M8 x 22
12 Oil return plug (12) 1/8" NPT 1/8" NPT
NP Name Plate (NP) - -
Data sheets
Technical and product information bulletins
Conformity declarations and certifications
Installation and start up instructions
Use and maintenance instructions
Previous documentation (consultation only)
Product brochure
Newsletter
Technical and usage information
We'd love to hear from you

For application support or questions about our products, send us a message.Our experienced staff is one of our gratest assets, and they are ready to help. To find out why Blue Is Better, contact us today.