SI | IP | |
Cylinders | 2 # | 2 # |
Displacement @ 50 Hz | 13.15 m3/h [50Hz] | 464 CFH [50Hz] |
Displacement @ 60 Hz | 15.78 m3/h [60Hz] | 557 CFH [60Hz] |
Motor version [1] | 1 | 1 |
Nominal Motor power | 2.2 kW | 2.2 kW |
Motor voltage at 50 Hz [2] | 220-240V - 380-420V/3/50Hz DOL V/ph/Hz | 220-240V - 380-420V/3/50Hz DOL V/ph/Hz |
Motor voltage at 60 Hz [2] | 265-290V - 440-480V/3/60Hz DOL V/ph/Hz | 265-290V - 440-480V/3/60Hz DOL V/ph/Hz |
Bridges for DOL start | Standard | Standard |
MRA, max operating current at 230V/50Hz and 280V/60Hz | 14.9 A | 14.9 A |
MRA, max operating current at 400V/50Hz and 460V/60Hz | 8.6 A | 8.6 A |
LRA, max starting current at 230V/50Hz and 280V/60Hz, DOL motor | 75.9 A | 75.9 A |
Max power consumption | 4.6 kW | 4.6 kW |
Frequency min | 30 Hz | 30 Hz |
Frequency max [3] | 87 Hz | 87 Hz |
Control and protection device | INT69® | INT69® |
Electric terminal box class protection | IP54 | IP54 |
Maximum pressure HP | 30 bar | 435.0 psi |
Maximum pressure LP | 20.5 bar | 297.3 psi |
Oil type [4] | PAG68 | PAG68 |
Oil charge (3/4 of sight glass) | 1.1 l | 37.20 fl oz |
Lubrication type | Centrifugal | Centrifugal |
Net weight | 49 kg | 108.03 lb |
Max Length | 374 mm | 14.74 inch |
Max Width | 242 mm | 9.53 inch |
Max Height | 317 mm | 12.49 inch |
Rubber mounts diameter | 30 mm | 1.18 inch |
Rubber mounts height | 30 mm | 1.18 inch |
Rubber mounts shore | 45 sh | 45 sh |
Compressor body material | Cast Iron | Cast Iron |
LRA, max starting current at 400V/50Hz and 460V/60Hz, DOL motor | 43.7 A | 43.7 A |
Note | |
[1] | Motor version: 1 = high and mid temp. all refrigerants; 2 = low and mid temp. all refrigerants; 3 = ECOinside, low temp. R134a, R1234ze, R1234yf only |
[2] | Other motor voltage available on request |
[3] | Maximum frequency depends on the working conditions: use the FSS.3 (Frascold selection software) |
[4] | For alternative lubricants refer to bulletin FTEC022 |
Accessory | Accessory code |
Kit adapters for oil equalization line - 1" ROT 5/8" ODS | T00SK170200 |
Kit adapters for oil equalization line - 1"1/4 ROT 1"1/8 ODS | T00SK170300 |
Oil heater (230V-50W) | T00CH13V1AX-RIC |
Abbreviation | Technical data | SI | IP |
SV | Suction valve (SV) | - | - |
DV | Discharge valve (DV) | - | - |
A | Length (A) | 374 mm | 14.74 inch |
B | Width (B) | 242 mm | 9.53 inch |
C | Height (C) | 317 mm | 12.49 inch |
D | Base mounting (D) | 234 mm | 9.22 inch |
E | Base mounting (E) | 194 mm | 7.64 inch |
F | Suction valve (F) | 165 mm | 6.50 inch |
G | Suction valve (G) | 221 mm | 8.71 inch |
H | Suction valve (H) | 53 mm | 2.09 inch |
L | Discharge valve (L) | 94 mm | 3.70 inch |
M | Discharge valve (M) | 192 mm | 7.56 inch |
N | Discharge valve (N) | 13 mm | 0.51 inch |
1 | High pressure plug (1) | 1/8" NPT | 1/8" NPT |
2 | Low pressure plug (2) | 1/8" NPT | 1/8" NPT |
3 | Oil charge plug (3) | 1/4" GAS | 1/4" GAS |
4 | Oil level sight glass (4) | - | - |
5 | Crankcase heater (5) | - | - |
6 | Oil drain plug (6) | M8 x 22 | M8 x 22 |
12 | Oil return plug (12) | 1/8" NPT | 1/8" NPT |
NP | Name Plate (NP) | - | - |