https://www.frascold.it
D4-16.1Y
Title
Semi-hermetic compressor with built-in electric motor, direct on line starting (DOL) and thermal protection probes (PTC or AMS) connected to the electronic control module
Standard
•∆ = 50Hz/220-240V/3Ph (60Hz/265-290V/3Ph)
•Y = 50Hz/380-420V/3Ph (60Hz/440-480V/3Ph)
- Electronic module INT69
- Suction shut-off valve
- Discharge shut-off valve
- Electric terminal box
- DOL connection bars
- POE oil charge
- Oil level sight glass
- Rubber dampers kit
- Packaging for transport, handling and storage
- Nitrogen charge (2bar min)
Opzione
- Electric motors for other voltage supply
- Special paint for off-shore installation
SI IP
Cylinders 2 # 2 #
Displacement @ 50 Hz 16.4 m3/h [50Hz] 579 CFH [50Hz]
Displacement @ 60 Hz 19.7 m3/h [60Hz] 696 CFH [60Hz]
Motor version [1] 1 1
Nominal Motor power 3 kW 3 kW
Motor voltage at 50 Hz [2] 220-240V - 380-420V/3/50Hz DOL V/ph/Hz 220-240V - 380-420V/3/50Hz DOL V/ph/Hz
Motor voltage at 60 Hz [2] 265-290V - 440-480V/3/60Hz DOL V/ph/Hz 265-290V - 440-480V/3/60Hz DOL V/ph/Hz
RSH Head capacity control steps 100-50 % 100-50 %
MRA, max operating current at 230V/50Hz and 280V/60Hz 20.1 A 20.1 A
MRA, max operating current at 400V/50Hz and 460V/60Hz 11.6 A 11.6 A
LRA, max starting current at 230V/50Hz and 280V/60Hz, DOL motor 90.3 A 90.3 A
Max power consumption 6.2 kW 6.2 kW
Frequency min 30 Hz 30 Hz
Frequency max [3] 87 Hz 87 Hz
Control and protection device INT69® INT69®
Electric terminal box class protection IP56 IP56
Maximum pressure HP 30 bar 435.0 psi
Maximum pressure LP 20.5 bar 297.3 psi
Oil type [4] POE32 POE32
Oil charge (3/4 of sight glass) 1.2 l 40.58 fl oz
Lubrication type Centrifugal Centrifugal
Net weight 51 kg 112.43 lb
Max Length 401 mm 15.80 inch
Max Width 242 mm 9.53 inch
Max Height 317 mm 12.49 inch
Rubber mounts diameter 30 mm 1.18 inch
Rubber mounts height 30 mm 1.18 inch
Rubber mounts shore 45 sh 45 sh
Sound power level (-10/45, R404A) [5] 67 dB(A) 69.5 dB(A)
Sound pressure level @ 1m (-10/45, R404A) [5] 59 dB(A) 61.5 dB(A)
Compressor body material Ghisa GJL250 Ghisa GJL250
Motor protection PTC PTC
Oil level sight glass 1 # 1 #
LRA, max starting current at 400V/50Hz and 460V/60Hz, DOL motor 52 A 52 A
Note
[1] Motor version: 1 = high and mid temp. all refrigerants; 2 = low and mid temp. all refrigerants; 3 = ECOinside, low temp. R134a, R1234ze, R1234yf only
[2] Other motor voltage available on request
[3] Maximum frequency depends on the working conditions: use the FSS.3 (Frascold selection software)
[4] For alternative lubricants refer to bulletin FTEC022
[5] Sound pressure in free field, hemispherical model at 1 meter distance, 50Hz; PWL and SPL in different conditions are available on FSS3
List of available accessories
Accessory Accessory code
Water cooled head T00SK50020
Electronic control module - INT 69 Diagnose (230/110V) T00EC01D-RIC
Oil heater (230V-50W) T00CH13-RIC
Head cooling fan - 230V/1/50-60Hz SZ-FM1
Electronic oil level regulator - INT280 Diagnose 230V AC T00EC1900
Kit adapters for oil equalization line - 1" ROT 5/8" ODS T00SK170200
Kit adapters for oil equalization line - 1"1/4 ROT 1"1/8 ODS T00SK170300
RSH capacity control head 230V AC T00SK220330
DP Modbus Gateway T00EC59
Connection cable Modbus Gateway - INT69 T00EC64
Abbreviation Technical data SI IP
SV Suction valve (SV) 1 ⅛ inch 1 ⅛ inch
DV Discharge valve (DV) ¾ inch ¾ inch
A Length (A) 401 mm 15.80 inch
B Width (B) 242 mm 9.53 inch
C Height (C) 317 mm 12.49 inch
D Base mounting (D) 234 mm 9.22 inch
E Base mounting (E) 194 mm 7.64 inch
F Suction valve (F) 165 mm 6.50 inch
G Suction valve (G) 225 mm 8.87 inch
H Suction valve (H) 53 mm 2.09 inch
L Discharge valve (L) 94 mm 3.70 inch
M Discharge valve (M) 192 mm 7.56 inch
N Discharge valve (N) 5 mm 0.20 inch
1 High pressure plug (1) 1/8" NPT 1/8" NPT
2 Low pressure plug (2) 1/8" NPT 1/8" NPT
3 Oil charge plug (3) 1/4" GAS 1/4" GAS
4 Oil level sight glass (4) - -
5 Crankcase heater (5) - -
6 Oil drain plug (6) M8 x 22 M8 x 22
12 Oil return plug (12) 1/8" NPT 1/8" NPT
NP Name Plate (NP) - -
Data sheets
Technical and product information bulletins
Installation and start up instructions
Previous documentation (consultation only)
Catalogues
Conformity declarations and certifications
Product brochure
Use and maintenance instructions
Newsletter
Technical and usage information
We'd love to hear from you

For application support or questions about our products, send us a message.Our experienced staff is one of our gratest assets, and they are ready to help. To find out why Blue Is Better, contact us today.