Q9-6TK
| SI | IP | |
| Cylinders | 4 # | 4 # |
| Displacement @ 50 Hz | 6 m3/h [50Hz] | 212 CFH [50Hz] |
| Displacement @ 60 Hz | 7.2 m3/h [60Hz] | 254 CFH [60Hz] |
| Motor version [1] | 1 | 1 |
| Nominal Motor power | 7 kW | 7 kW |
| Motor voltage at 50 Hz [2] | 220-240V - 380-420V/3/50Hz DOL V/ph/Hz | 220-240V - 380-420V/3/50Hz DOL V/ph/Hz |
| Motor voltage at 60 Hz [2] | 265-290V - 440-480V/3/60Hz DOL V/ph/Hz | 265-290V - 440-480V/3/60Hz DOL V/ph/Hz |
| Bridges for DOL start | Standard | Standard |
| MRA, max operating current at 230V/50Hz and 280V/60Hz | 41.1 A | 41.1 A |
| MRA, max operating current at 400V/50Hz and 460V/60Hz | 23.6 A | 23.6 A |
| LRA, max starting current at 230V/50Hz and 280V/60Hz, DOL motor | 171 A | 171 A |
| LRA, max starting current at 400V/50Hz and 460V/60Hz, DOL motor | 96.8 A | 96.8 A |
| Frequency min | 30 Hz | 30 Hz |
| Frequency max [3] | 70 Hz | 70 Hz |
| Control and protection device | INT69® | INT69® |
| Electric terminal box class protection | IP56 | IP56 |
| Maximum pressure HP | 140 bar | 2,030.0 psi |
| Maximum pressure LP | 80 bar | 1,160.0 psi |
| Oil type [4] | PAG68 CO2 | PAG68 CO2 |
| Oil charge (3/4 of sight glass) | 1.8 l | 60.87 fl oz |
| Lubrication type | Centrifugal | Centrifugal |
| Suction valve (SV) | inch | inch |
| Net weight | 96 kg | 211.64 lb |
| Max Length | 502 mm | 19.78 inch |
| Max Width | 310 mm | 12.21 inch |
| Max Height | 324 mm | 12.77 inch |
| Rubber mounts diameter | 40 mm | 1.58 inch |
| Rubber mounts height | 40 mm | 1.58 inch |
| Rubber mounts shore | 45 sh | 45 sh |
| Compressor body material | Cast Iron | Cast Iron |
| Max power consumption | 11.2 kW | 11.2 kW |
| Note | |
| [1] | Motor version: 1 = high and mid temp. all refrigerants; 2 = low and mid temp. all refrigerants; 3 = ECOinside, low temp. R134a, R1234ze, R1234yf only |
| [2] | Other motor voltage available on request |
| [3] | Maximum frequency depends on the working conditions: use the FSS.3 (Frascold selection software) |
| [4] | For alternative lubricants refer to bulletin FTEC022 |
| Accessory | Accessory code |
| Crankcase oil heater (230V-130W) | T00CH03 |
| Electronic oil level switch (230V) | T00SK170600 |
| Abbreviation | Technical data | SI | IP |
| DV | Discharge valve (DV) | inch | inch |
| DV | Discharge valve Ogive connection (DV) | 16.2 mm | 16.2 mm |
| A | Length (A) | 502 mm | 19.78 inch |
| B | Width (B) | 310 mm | 12.21 inch |
| C | Height (C) | 324 mm | 12.77 inch |
| D | Base mounting (D) | 312 mm | 12.29 inch |
| E | Base mounting (E) | 246 mm | 9.69 inch |
| F | Suction valve (F) | 257 mm | 10.13 inch |
| G | Suction valve (G) | 204 mm | 8.04 inch |
| H | Suction valve (H) | 40 mm | 1.58 inch |
| L | Discharge valve (L) | 123 mm | 4.85 inch |
| M | Discharge valve (M) | 259 mm | 10.20 inch |
| N | Discharge valve (N) | 14 mm | 0.55 inch |
| 1 | High pressure plug (1) | 1/8" NPT | 1/8" NPT |
| 3 | Oil charge plug (3) | 1/4" GAS | 1/4" GAS |
| 4 | Oil level sight glass (4) | - | - |
| 5 | Crankcase heater (5) | - | - |
| 6 | Oil drain plug (6) | M8 | M8 |
| 12 | Oil return plug (12) | 1/8" NPT | 1/8" NPT |
| 13 | Magnetic plug (13) | 1/2" GAS | 1/2" GAS |
| 14 | Max. discharge temperature sensor (14) | 1/8" NPT | 1/8" NPT |
| 16 | Crankcase pressure plug (16) | 1/8" NPT | 1/8" NPT |
| 7 | Safety valve high pressure side | - | - |
| 8 | Safety valve low pressure side | - | - |
| NP | Name Plate (NP) | - | - |
