https://www.frascold.it
Z40-140AXH
Title
6 cylinder compressor with integrated part winding start (PWS) electric motor and ptc probes connected to the protection and diagnosis system
Designed and manufactured in compliance with the safety requirements of the 2014/34/EU ATEX directive. Suitable for use in environments with possible random presence of flammable gases in the atmosphere,
Available in three different versions
AXH for operation with hydrocarbons [R290, R1270, R600, etc.].
PAG lubricating oil charge
AXY for operation with HFC, HCFC, HFO refrigerants.
POE lubricating oil charge
AXE ECOinside build optimized for operation with R134a and HFO [R1234ze,R1234yf, etc.] refrigerants
POE type oil charge

Standard
•PWS (Y/YY) = 50Hz/380-420V/3Ph (60Hz/440-480V/3Ph)
•DOL (YY) = 50Hz/380-420V/3Ph (60Hz/440-480V/3Ph)
- Electronic control module INT69 TML Diagnose for monitoring, protection, diagnostics and communication
- Suction shut-off valve
- Discharge shut-off valve
- Electric terminal box
- DOL connection bars
- Discharge temperature sensor
- Reversible oil pump
- Electronic oil differential pressure switch
- PAG68 oil charge
- Oil level sight glass
- Liquid injection connection
- Rubber dampers kit
- Nitrogen charge (2bar min)
- Packaging for transport, handling and storage
Opzione
- Electric motors for various voltage supply values
- Special paint for off-shore installation
SI IP
Suction valve (SV) 2⅝ inch 2⅝ inch
Discharge valve (DV) 1⅝ inch 1⅝ inch
Cylinders 6 # 6 #
Displacement @ 60 Hz 167.6 m3/h [60Hz] 5 CFH [60Hz]
Displacement @ 50 Hz 139.7 m3/h [50Hz] 4 CFH [50Hz]
Motor version [1] 2 2
Motor voltage at 50 Hz [2] 380-420V/3/50Hz PWS V/ph/Hz 380-420V/3/50Hz PWS V/ph/Hz
Motor voltage at 60 Hz [2] 440-480V/3/60Hz PWS V/ph/Hz 440-480V/3/60Hz PWS V/ph/Hz
Motor protection AMS AMS
Control, diagnostics and protection device INT69® TML Diagnose INT69® TML Diagnose
Nominal Motor power 30 kW 30 kW
PWS partition 50-50 50-50
MRA, max operating current at 400V/50Hz and 460V/60Hz 70 A 70 A
LRA, max starting current at 400V/50Hz and 460V/60Hz, PWS motor 159.2 A 159.2 A
LRA, max starting current at 400V/50Hz and 460V/60Hz, PWS motor-DOL connection 273 A 273 A
Max power consumption 37.9 kW 37.9 kW
Frequency min 30 Hz 30 Hz
Frequency max [3] 70 Hz 70 Hz
Electric terminal box class protection IP54 IP54
RSH Head capacity control steps 100-83-66-50 % 100-83-66-50 %
CC Head capacity control steps 100-66-33 % 100-66-33 %
Maximum pressure HP 30 bar 435.0 psi
Maximum pressure LP 20.5 bar 297.3 psi
Oil type [4] POE68 POE68
Oil charge (3/4 of sight glass) 7.2 l 243.46 fl oz
Lubrication type Oil pump Oil pump
Oil level sight glass 2 # 2 #
Max Length 794 mm 31.28 inch
Max Width 509 mm 20.05 inch
Max Height 536 mm 21.12 inch
Net weight 240 kg 529.10 lb
Rubber mounts diameter 50 mm 1.97 inch
Rubber mounts height 40 mm 1.58 inch
Rubber mounts shore 55 sh 55 sh
Compressor body material Ghisa GJL250 Ghisa GJL250
Sound power level (-10/45, R404A) [5] 83 dB(A) 85.5 dB(A)
Sound pressure level @ 1m (-10/45, R404A) [5] 75 dB(A) 77.5 dB(A)
Note
[1] Motor version: 1 = high and mid temp. all refrigerants; 2 = low and mid temp. all refrigerants; 3 = ECOinside, low temp. R134a, R1234ze, R1234yf only
[2] Other motor voltage available on request
[3] Maximum frequency depends on the working conditions: use the FSS.3 (Frascold selection software)
[4] For alternative lubricants refer to bulletin FTEC022
[5] Sound pressure in free field, hemispherical model at 1 meter distance, 50Hz; PWL and SPL in different conditions are available on FSS3
List of available accessories
Accessory Accessory code
Oil heater (230V-150W) T00CH9-RIC
CC capacity control head 230V AC T00SK220200
US unloader start head 230V AC T00SK250200
Kit adapters for oil equalization line - 1" ROT 5/8" ODS T00SK170200
Kit adapters for oil equalization line - 1"1/4 ROT 1"1/8 ODS T00SK170300
RSH capacity control head 230V AC T00SK220400
DP Modbus Gateway T00EC59
Water cooled head T00SK50000
Connection cable Modbus Gateway - INT69 T00EC65
USB adapter cable T00EC57
Abbreviation Technical data SI IP
A Length (A) 794 mm 31.28 inch
B Width (B) 509 mm 20.05 inch
C Height (C) 536 mm 21.12 inch
D Base mounting (D) 381 mm 15.01 inch
E Base mounting (E) 305 mm 12.02 inch
F Suction valve (F) 180 mm 7.09 inch
G Suction valve (G) 433 mm 17.06 inch
H Suction valve (H) 130 mm 5.12 inch
L Discharge valve (L) 100 mm 3.94 inch
M Discharge valve (M) 411 mm 16.19 inch
N Discharge valve (N) 95 mm 3.74 inch
1 High pressure plug (1) 1/8" NPT 1/8" NPT
2 Low pressure plug (2) 1/4" NPT 1/4" NPT
3 Oil charge plug (3) 3/8" GAS 3/8" GAS
4 Oil level sight glass (4) - -
5 Crankcase heater (5) - -
6 Oil drain plug (6) 1/4" GAS 1/4" GAS
7 Liquid injection valve plug (7) 1/4" NPT 1/4" NPT
8 Liquid injection sensor plug (8) - -
9 Oil pressure switch connection (LP) 1/4" SAE 1/4" SAE
10 Oil pressure switch connection (HP) 1/4" SAE 1/4" SAE
11 Oil filter (11) 3/8" GAS 3/8" GAS
12 Oil return plug (12) 1/4" NPT 1/4" NPT
14 Max. discharge temperature sensor (14) - -
15 Electronic oil pressure switch connection - -
NP Name Plate (NP) - -
Data sheets
Installation and start up instructions
Technical and product information bulletins
Conformity declarations and certifications
Use and maintenance instructions
Previous documentation (consultation only)
Catalogues
Product brochure
Technical and usage information
We'd love to hear from you

For application support or questions about our products, send us a message.Our experienced staff is one of our gratest assets, and they are ready to help. To find out why Blue Is Better, contact us today.